Call of Duty Black Ops III is a shooter developed by Treyarch and published by Activision. The game was released on the PlayStation 4, Xbox One,Microsoft Windows and OS X platforms on October 12th for PC users.
The “black ops 3 not responding on launch” is a problem that has been present for a while. If you are experiencing crashes, problems with black screen or the game not launching, then there are some solutions listed below.
Many people have reported issues with the game Call of Duty Black Ops III on the first run. The following suggestions can help you avoid crashes, startup issues, and black screens.
The first step is to ensure that your computer fulfills the game’s minimal system requirements. The following is a list of them:
- Windows 7 64-bit, Windows 8 64-bit, and Windows 8.1 64-bit are the operating systems available.
- Intel® CoreTM i3-530 @ 2.93 GHz / AMD Phenom TM II X4 810 @ 2.60 GHz Processor
- Memory: 6 gigabytes (GB) of RAM
- NVIDIA® GeForce® GTX 470 (1 GB) / ATI® Radeon TM HD 6970 (1 GB) graphics
- Version 11 of DirectX
- Broadband Internet access is provided through the network.
- 60 GB of empty space on the hard disk
- DirectX compliant sound card
Whether you’re not sure if your system has the most up-to-date drivers, you should look for them. This may be done using specific tools or on the official website of the component makers.
If you attempt to play a game and it says there are missing DLL files, we suggest reinstalling DirectX or checking for updates.
How to Fix a Write Error on a Hard Drive in Call of Duty Black Ops III
During the installation of Call of Duty Black Ops III, you may get a Steam error message stating that the game files could not be downloaded or installed. To fix this problem, perform the following:
Manually remove all the empty files and directories (with a size of 0 bytes) stored in the root folder in the directory where the game is downloaded and installed (default is Steam / common). Then restart Steam, and the missing files and directories will be downloaded automatically. If this does not occur automatically, it is advised that you begin evaluating the integrity of the game files using the Steam library’s relevant settings.
There is no sound in Call of Duty: Black Ops III. What should I do?
Some system configurations prevent access to the sound card settings during the installation of the Call of Duty Black Ops III game. As a result, there is no sound in the game. To fix this mistake, you’ll need:
Select the chosen choice — stereo or 5.1 — in Control Panel> Hardware and Sound> Sound> your speakers / speakers / headphones> Configure>. After that, restart the game by clicking Apply.
How can I get rid of the dark screen in Call of Duty: Black Ops III?
Some users have experienced a blank screen after installing Call of Duty Black Ops III, making it difficult to access the game’s settings and attempt to adjust the setup. Use the following steps to tackle such a problem:
Follow the Steam / steam / apps / common / Call of Duty Black Ops III / players / / / / / / / / / / / / / / / / / / /
Open Notepad, put the following code snippet into it, then save it in the config.ini folder. The game will then be restarted.
Copy and paste the following code into config.ini:
//
/Gameplay
//
/Rate limit for frames (0 for none)
/ 0 to 1000 MaxFPS = “60”
/Display the current framerate on the screen
0 or 1 if DrawFPS = “0”
/Smoothing of framerates may be turned on or off.
SmoothFramerate = “0” / 0 or 1 SmoothFramerate = “0” SmoothFramerate = “1” SmoothFram
/Horizontal field of vision in degrees for a 16:9 aspect ratio
FOV = “80” / 65-120 mm
SplitscreenOrientation = “0” / 0 or 1 SplitscreenOrientation = “0” SplitscreenOrientation = “0” SplitscreenOrientation
/Turn on voice chat across the network.
“1” for VoiceChat / 0 or 1 for VoiceChat
/Enable sound occlusion behind solid objects.
“1” for SoundOcclusion; / 0 or 1 for SoundOcclusion.
/Amount of mouse smoothing
0 to 10 / MouseFilter = “0”
0 to 1 / MouseAcceleration = “0”
0.1 to 30 / MouseSensitivity = “2”
/Vertical sensitivity of the mouse
/ -1 to 1 MouseVerticalSensitivity = “0.022”
/Use the mouse to enable vertical look.
0 or 1 if MouseVerticalLook = “1”
/Maximum amount of human bodies in the same place at the same time
“32” is the number of corpses; 1 to 32 is the number of corpses.
/Number of frames the driver is permitted to enqueue; a smaller number reduces input delay but may reduce performance. To utilize the system default, set it to 0, which is generally 3.
/ 0 to 4 MaxFrameLatency = “0”
//
/Setup
//
To compel auto-detect to execute at startup, set the value to zero.
“1” if AutoDetectHasRun = “0” if AutoDetectHasRun = “0” if AutoDetectHasRun =
/The number of threads used to handle the task queue.
2 to 4 WorkerThreads = “2”
/Clear to make sure the driver is up to date.
LastDriverNvidia = “35887” / 0 and up
/Clear to make sure the driver is up to date.
LastDriverAMD = “0” / 0 and up
/Amount of video memory used in comparison to the goal
/ 0.75 to 1 VideoMemory = “0.95”
//
/Display
//
/ 0 indicates windowed mode, 1 indicates fullscreen mode, and 2 indicates fullscreen window mode.
/ 0 to 2 FullScreenMode = “2”
/Position of the window on the X-axis
-8192 to 8192; WindowX = “0”
/Y-axis of the window
-8192 to 8192 / WindowY = “0”
If WindowSize is set to “800×600,” any text will be shown.
1 to 240 / RefreshRate = “59.95”
/Use this monitor index for fullscreen.
/ 0 to 8 monitor = “1”
/Vsync only works in fullscreen mode.
/ 0 or 1 Vsync = “0”
/The 3D scene renders at a certain percentage of the window resolution.
50 to 200 / ResolutionPercent = “100”
/For monitor output, color spaces
DisplayGamma = “sRGB” / sRGB, rec.709, or rec.709 – Limited sRGB, rec.709, or rec.709 – Limited sRGB, rec.709, or rec.709 – Limited
Set to 3 to enable triple buffering, which is important for preventing big framerate decreases while using vsync.
2 to 3 BackbufferCount = “2”
//
/Graphics
//
/Lods to drop on models; the smaller the number, the better the model.
MeshQuality = “1” / 0 to 8 MeshQuality = “1” MeshQuality = “1” MeshQuality
/0 – Activate 2x anisotropic filtering, 1 per material, 2 force
0 to 2 TextureFilter = “1”
/Mips to drop on streaming textures; the smaller the number, the better the quality.
0 to 3 TextureQuality = “2”
/Mips to drop on effects and dynamic decals; the smaller the amount, the better the quality.
0 to 15 TextureQualityFX = “2”
/Mips to drop on reflections; smaller numbers indicate better quality.
0 to 16 TextureQualityProbes = “1”
/Mips to drop on sun shadows; smaller numbers indicate better quality.
0 to 2 TextureQualityBakedSunShadows = “1”
/Instead of streaming, force the lowest mips to remain loaded.
0 or 1 if TextureLowDetailResident = “0”
0 or 1 for DisableDynamicLightShadows = “1”
0 or 1 for DisableDynamicSunShadows = “1”
/Resolution of shadows cast by spot lights
/ 128 to 8192 SpotShadowTextureSize = “1024”
/Analysis of omni (point) light shadow resolution
128 to 2048 / OmniShadowTextureSize = “256”
/Make multi-sampled soft shadows available.
“1” for ShadowFiltering; / 0 or 1 for ShadowFiltering
/Number of lights with normally static shadows that must be turned on for figures to have shadows.
0 to 16 / ActorShadows = “0”
/Allow volumetric sun and light shafts to be used.
VolumetricLightingEnabled = “1” / 0 or 1 VolumetricLightingEnabled = “1” VolumetricLightingEnabled = “1”
/Rammarch sample count for sunshine
1 to 256 / VolumetricLightingMaxSunSamples = “8”
/Raymarch sample count for local lights
1 to 256 / VolumetricLightingMaxLightSamples = “40”
If the color is consistent, skip the rest of the samples.
“1” if VolumetricLightingSkipSunSamples = “0” if VolumetricLightingSkipSunSamples = “0” if VolumetricLightingSkip
If the color is consistent, skip the rest of the samples.
VolumetricLightingSkipLightSamples = “1” / 0 or 1 VolumetricLightingSkipLightSamples = “1” VolumetricLightingSkipLightSa
/Transparency that is order-independent has been enabled.
/ 0 or 1 OIT = “1”
/The number of overlapping transparency layers that may be used is as high as possible.
OITLayers = “8” / 8, 9, 12, or 16 OITLayers = “8” OITLayers = “8” OITLay
/A mechanism for occluding ambient light in screen space.
Disabled, HEMIAO, GTAO Low Quality, GTAO Medium Quality, GTAO High Quality, or GTAO Ultra Quality SSAOTechnique = “GTAO Medium Quality”
/An anti-aliasing method is a technique that reduces the appearance of arti
“Filmic SMAA T2x” is the AATechnique. SMAA 1x, Filmic SMAA 1x, SMAA T2x, or Filmic SMAA T2x / None, FXAA, SMAA 1x, Filmic SMAA 1x, SMAA T2x, or Filmic SMAA T2x
/Motion blur for each individual item
Off, Auto, or On with MotionBlur = “Auto”
Low, Medium, or High MotionBlurQuality = “Medium”
/More skin-friendly lighting
0 or 1 for SubsurfaceScattering
How to Increase FPS in Call of Duty Black Ops III
Poor visual quality and low frame rate were perhaps the most prominent complaints from customers following the release of Call of Duty Black Ops III.
One of our users suggested the change, and it’s extremely simple: go to the graphics settings and disable dynamic shadows. After resuming the game, you’ll see that the graphic quality and fluidity have improved dramatically.
I’m unable to choose a game mode in Call of Duty Black Ops III. What should I do?
Users have often told us that there is no ability to alter or pick game modes – all menu items are inactive.
Only a complete reinstall of the game will assist in this scenario. Open Steam, remove the game using the relevant library option, and then reinstall it. This should take care of the mode selection issue.
How to Fix Graphics and Picture Lags in Call of Duty Black Ops III on NVIDIA?
For the time being, the game is not well optimized for certain NVIDIA graphics cards. We’ve received instances of users’ screens jerking or even collapsing completely.
Open the file Notepad config.ini, which is located in the game’s root directory, and search for the option VideoMemory and adjust its value as given in the example below to address this problem and achieve a steady visual quality. Restart the game after saving your modifications.
/Amount of video memory used in comparison to the goal
/ 0.75 to 1 VideoMemory = “0.75”
Alternative method for increasing FPS and resolving image issues in Call of Duty Black Ops III.
In Call of Duty Black Ops III, we’ve previously discussed how to resolve the issue of low FPS and visual delays. If our previous suggestions haven’t yielded the desired results, try the following procedure.
Look for the option WorkThread in the Notepad config.ini file, which is located in the game’s root directory, and change the value from 2 to 4.
How can I fix mouse difficulties in Call of Duty Black Ops III?
During Call of Duty Black Ops III gameplay, you may notice that the mouse does not perform as expected, or maybe does not operate at all, and that there are delays or that it erroneously reacts to your orders.
The primary thing you need to do to get rid of mouse difficulties is to adjust the FPS number in the game settings to a figure lower than your monitor’s frequency. If your display has a 60 Hz refresh rate, for example, you need change the game settings to 58 FPS. Then restart the game, and the control issues will be gone.
How to Fix Lags in Multiplayer Mode in Call of Duty Black Ops III
Even those that have no issues with the visuals, launch, or control of Call of Duty Black Ops III may have issues connecting to the game in multiplayer mode. Follow these steps to prevent disconnection or inability to connect to the server:
- Check the network connection quality in different games and apps.
- To open specific ports, see the handbook on our website. The connection limitation will be removed as a result of this.
- Disable your anti-virus software’s active mode or even unload it from the background mode for a while. The game will then be restarted.
Have you discovered a blunder? Ctrl + Enter will highlight the text.
The “black ops 3 safe mode crash” is a problem that has been present for a while. If you are experiencing crashes, problems with launch and black screens, try the following fixes:
Frequently Asked Questions
How do you fix Black Ops 3 black screen?
A: There are two things you can do to fix the black screen issue. The first is restarting your console, which will take care of any corrupted data that might be present on it. If this doesnt work, then we recommend updating your graphics card drivers or an update for Black Ops 3 itself.
Why is Black Ops 3 not opening?
A: Black Ops 3 is not opening because your computer or console might be out of date. Please update the game to play, and it should work again.
How do I fix Call of Duty Black Ops from crashing?
A: In the main menu, go into Options and then Multiplayer. Under Clan Tag, select Change to your clan tag from here. From there, change the name of your current clan from whatever it is now in a text box labeled Clan Name.
Related Tags
- black ops 3 black screen then crash
- black ops 3 won’t launch pc 2021
- black ops 3 won’t launch pc 2020
- black ops 3 crashing on startup
- black ops 3 safe mode crash 2021